If necessary, a cable may be used between the microphone and the DM1 - but the shorter the cable, the better the overall performance. Note: For optimum results, it is recommended to plug the DM1 directly into the output of the microphone. The DM1's output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz, and hum. What's more, thanks to its dedicated output buffer amplifier, the gain boost it delivers is always a consistent 28dB regardless of the connected load. With its state-of-the-art Class A circuit and hand-selected high-grade FETs, the DM1 boasts the lowest self-noise in its class.

I definitely recommend this, especially if you use an SM7b. This piece of equipment allowed me to drop my gain to about 35-40 virtually eliminating any Pre-amp noise. I also use a Focusrite Scarlett Solo Second Generation with it. Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards. I use the DM1 with a Shure SM7b, a notoriously gain-hungry microphone. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum. Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration. The DM1 Dynamite Active Inline Microphone Preamplifier from sE Electronics is an active inline preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately). +28db Of Clean, Consistent Gain, Independent Of Load Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. The DM1 DYNAMITE: explosive level for all your passive mics The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound. sE Electronics DM1 Dynamite Microphone preamplifier from sE Electronics is an active inline preamp intended to be inserted between a passive ribbon or. Some mics need a LOT of gain - and not all preamps are up to the challenge. Get optimum performance from the mics you love with the sE Electronics DM1 Dynamite!. Inserted between a passive ribbon or dynamic microphone and a mic preamplifier, the DM1 will also reduce the possibility of interference, while providing a healthy level to your preamp - without any added noise or coloration. The sE Electronics DM1 Dynamite is an active inline microphone pre-amplifier that is designed to be used with a passive ribbon or dynamic microphone and. If you've shied away from using low-output mics you love the sound of because you don't have access to a high-gain preamp, well, those days are over! The sE Electronics DM1 Dynamite is an active in-line preamp that boosts the signal of your passive ribbon and dynamic mics by a robust 28dB.

Music Experience has a toolbox essential for all recording and front-of-house engineers.

Se electronics dm1 dynamite